Magnetic Deburring & Polishing Machine

This patented device generates magnetic field that motivates magnetized pins to bounce rapidly and to grind parts.

Features
1.For High Precision Parts
The pins grind parts mildly. Best for grinding high precision parts.
 Never deform parts
 Never affects accuracy
 Never damage surfaces

2.Grind Every Corner
The pins reach every corner. Best for irregular parts that convention/manual deburring cannot handle.

Effect

1.Deburring
The sPINner can be very efficient (within 5-15 minutes), remove small burrs and burrs at the processing or cutting, and slightly chamfer the sharp edges to ensure that the workpiece size accuracy will not be affected. After grinding, the workpiece is round and not cut, which greatly reduces the resistance when the workpiece is assembled / engaged / transmitted. In addition, the burr of the mold of the die-casting part also has a good removal effect.

2.Polishing
The sPINner can slightly remove the metal surface layer, resulting in a matte polishing effect and increasing metallic luster. And can remove knife marks. Scratches. It can also remove the rust layer of steel / iron, the oxide layer of copper / aluminum, the scorch caused by laser, and the oxidation caused by heat treatment, so that it can restore the brightness and reduce the chromatic aberration.

---